Our website is being upgrated, welcome to contact us if any questions.
Holding tool for mechanical bolted lugs (14-42 mm), JTN-10
JTN-10
Description:
Holding tool for mechanical bolted lugs JTN-10 either called Clamp device for screw connector，is a device to hold mechanical cable lugs and connectors during the application. Its designed for convinient installation. Made of a durable material, the tool is mainly used in power cable area, underground and indoor joints and mechanical assembly for connecting power cables, wires and stud lugs.
- Product detail
- Specification
- Video
- Inquiry
Key Features
- Used for both bolted connectors and cable lugs.
- Wide application diameter 14 to 42 mm,
- Comply to jera line lugs and connectors up to 400 mm2.
- Voltage up to 1000AC and 2000DC,
- Has proven clamping system of tread.
- High quality materials, for low temperatures application -40 °C, and high temperatures up to 50 °C.
- Considered to be the best solution of quality/ price ratio.
SPECIFICATION
Key Installation steps：
- Unscrew the handle to fit the chosen cable lug or connector.
- Locate the cable lug or connector in the tool.
- Add the plastic insert in case of shortage of clamping area.
- Gradually twist the hand until its proper fixation of lug or connector.
- Use the tool by one hand and torque wrench by other hand to provide the convenience of installation.
- Unscrew the handle after installation, return the plastic insert to bottom position in order do not loose it.
The mechanical bolt lug retention tool JTN-10 is designed to hold the bolt lug securely in place and prevent it from loosening or falling out. They usually include a clamping device or arm to securely hold the lug in the desired position. Mechanical lug installation tool is also equipped with a rotation or adjustment function to better accommodate different types of lugs and installation requirements.
APPLICATION
Application：Holding tool GH-40-I-V, Clamp device for screw connector 14-40 mm
Jera is a direct manufacturer, produce a wide range product for low voltage line construction, our product includes low voltage tension clamps, suspension clamps, anchor brackets, stainless steel banding, dead end guy grips, insulation piercing connectors, bolt mechanical lugs, cable connectors etc.
Welcome to contact us about Mechanical Connector Holding Tool JTN-10
Manufacturing
Watch Our Factory Video
Technical specification
|
Product code |
Application |
Connector outer diameters, mm |
|
JTN-10 |
Mechanical cable lugs and connectors 4-400 sqm. |
14-42 |
PRODUCT VIDEO
CONTACT US
Fill this form for quick answer within 12 hours:
RELATED PRODUCTS
